Announcement

Collapse
No announcement yet.

GSXR Wheel/Rotor/Sprocket/Caliper Spacer Matrices

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • GSXR Wheel/Rotor/Sprocket/Caliper Spacer Matrices

    I put together this little 'cheat sheet' for use when mixing matching wheels rotors.
    Attached Files
    Last edited by zoran; April 17th, 2012, 05:51 PM.

  • #2
    Here is chart for required spacer size for mixing/matching forks & calipers.

    Get your custom spacers from http://www.twfracing.com/zparts.html

    Note: For those cells marked N/A, that combo is actually taller than the rotor.
    For those applications - if required - it will be necessary (where possible) to machine the calipers - contact TWF also for this service.
    Attached Files
    Last edited by zoran; April 17th, 2012, 05:59 PM.

    Comment


    • #3
      This is the Suzuki Fork Matrix that was created over at TLZone
      Attached Files
      Last edited by zoran; April 17th, 2012, 05:56 PM.

      Comment


      • #4
        This is matrix for use with GSXR Rear Wheel swap for SV - or for general GSXR usage.
        These are all the available OEM Sprocket fitments that fit GSXR Sprocket carrier.

        Comment

        Working...
        X